USBRESET=0, SYNC_DET=0, USB_RESUME_INT=0, USBRESMEN=0
USB Transceiver Control Register 0
USB_RESUME_INT | USB Asynchronous Interrupt 0 (0): No interrupt was generated. 1 (1): Interrupt was generated because of the USB asynchronous interrupt. |
SYNC_DET | Synchronous USB Interrupt Detect 0 (0): Synchronous interrupt has not been detected. 1 (1): Synchronous interrupt has been detected. |
USBRESMEN | Asynchronous Resume Interrupt Enable 0 (0): USB asynchronous wakeup from suspend mode disabled. 1 (1): USB asynchronous wakeup from suspend mode enabled. The asynchronous resume interrupt differs from the synchronous resume interrupt in that it asynchronously detects K-state using the unfiltered state of the D+ and D- pins. This interupt should only be enabled when the Transceiver is suspended. |
USBRESET | USB Reset 0 (0): Normal USB module operation. 1 (1): Returns the USB module to its reset state. |